Cheng House Plastics Co., Ltd.
|
Payment Terms: | T/T,L/C;Cash |
Place of Origin: | Guangdong, China (Mainland) |
Add to My Favorites | |
HiSupplier Escrow |
Reusable Instant Hot Pack
Special Features:
Material: 0.4mm PVC film with non-toxic liquid
Ideal for outdoor activities
Provides heat to approximately 50 to 55 degree Celsius and releases heat for up to 15 to 30minutes
How to use:
1) Flex metal disc once or untill the liquid crystalised
2) Massage the pack to soften
3) Apply the Instant Heat Pack on desired area.
(if the temperature is too high, wrap a cloth around the heat pack before using)
To use COLD:
1) Place the pack (liquid form) in the refrigerator for at least 30 minutes before use
How to Reuse after crystalised:
1) Boil water in a pot
2) Wrap the Instant Hot Pack with a cloth to avoid direct contact with the pot
3) Place the pack (with wrapped cloth) inside the pot and continue boiling the water until ALL crystals are dissolved and only transparent liquid remains (usually around 20 minutes).
4) Remove the pack (with tongs) from the boiling water and make sure all crystals have dissolved (hold it up against the light to check), or it will trigger the heating again.
5) Place the Instant Hot Pack on a cloth to cool down, or wrap the product with cloth and apply to desired area (be cautious with high temperature).
6) When the liquid pack cools down, it is ready to be used again.
CAUTION!!!
Be cautious of the water temperature and the temperature of the Instant Hot Pack while removing it from hot water.
Avoid direct contact with internal material, however, if contacted with the gel within, wash the contacted area with soap and water. If irritation continues, seek medical help.
Note:
●If the crystals begin to form while the product is cooling down, it means the crystals from previous reaction didn't dissolved completely and must be re-boiled.
● If flex the metal disc while the product is still hot from boiled water, the reaction will be incomplete and must be re-boiled. Therefore, please wait until the product has fully cooled before flexing the metal disc to activate.